ماژول رله 12 ولت تک کاناله دارای سنسور فوتوسل
با استفاده از این ماژول می توانید چراغ های حساس به نور راه اندازی کنید تا در صورت طلوع آفتاب چراغ ها خاموش و با غروب آفتاب چراغ ها روشن شوند. با توجه به داشتن رله می توانید جریان DC یا AC با حداکثر 10 آمپر هدایت نمایید.
این محصول دارای پتانسیومتر تنظیم حساسیت می باشد تا بر اساس شدت نور رله عمل نماید. میزان مصرف در حالت بیکاری فقط 50 میلی آمپر
Features
1 , using the strength of the photoresistor light sensor, comes with genuine quality relay , can directly control AC or DC load,Normally open interfaces maximum load capacity: AC 0V - 250V /. 10A , DC 0V - 30V /. 10A;
2 , sensitivity adjustable via potentiometer, by adjusting the potentiometer, set the relay start threshold, when this dark threshold The module relay, light when this threshold, the relay release;
3 , Smart regulation design, when the relay automatically after trimming action threshold to solve the problem of the critical value of repeated action;
4 , function modules with anti-reverse, reverse polarity power supply without damaging the module;
5 , equipped with a power indicator light (red), relay status indicator (blue)
6 , with 4 fixing bolt holes for easy installation;
7 , module size : 5.0cm * 3.0cm * 1.8cm ;
8 , the module comes free 30cm long photosensitive resistance detection lead;
Instructions:
1 , the module photoresistor sensitive to ambient light, generally used to detect changes in the brightness of the ambient light;
2 , the module when the ambient light is darker than the set threshold, the relay, the common terminal and the normally beginning on (and normally closed terminal is disconnected), when the external ambient light is brighter than the set threshold value, the relay is switched off, the common and often start off (normally closed terminal ON);
3 , common, normally open, normally closed three ports is equivalent to a dual-control switch, relay coil when there is electricity, common and normally open conduction, without electricity, the common terminal and the normally closed end conduction;
Electrical parameters
Current : 12V is less than 50mA (less than when the relay is not activated 5mA )
Operating temperature: Recommended -20 deg.C - 60 deg.C (maximum operating temperature range of -30 deg.C - 70 deg.C )
Load capacity: Relay normally open port maximum load capacity: DC 0-30V /. 10A , AC 0-250V / 10A
Relay NC port maximum load capacity: DC 0-28V / . 10A , AC 0-125V / . 10A